Our Products

Titanium Dioxide Nanoparticles Coated with Silicon and Aluminum (TiO2, Rutile, 30nm)

There is a wide range of product application in different fields with a large different amount of dosage, from 0.5 to 8%. In general, the quantity to be added is about 1-3% for sunscreen agent, 3-5% for whitening and moisture preservation, 3-8% for ultraviolet ray resistance and 2.5% for printing ink and coating. The end user shall determine the quantity to be added through testing and make the best dosage choice for the best use..

Titanium Dioxide Nanoparticles Coated with Silicon and Aluminum (TiO2, Rutile, 30nm)

Titanium Dioxide Nanoparticles Coated with Silicon and Aluminum (TiO2, Rutile, 30nm)
Product No.CAS No.FormulaMolecular WeightAPSPurityColorForm
NRE-304213463-67-7TiO279.866 g/mol30nm (can be customized)98%whitePowder
Density(Bulk): 0.58g/ml
Melting Point1843 °C
Boiling Point2972 °C
Certificate of Analysis

Ti

O

Mg

Na

Ca

59.9%

39.8%

<55ppm

<160ppm

<75ppm


Titanium Dioxide Nanoparticles Coated with Silicon and Aluminum Application:

1. UV-resistant material, chemical fiber, plastics, printing ink, coating; 2. Photocatalyst, self-cleaning glass, self-cleaning ceramics,
antibacterial material, air purification, sewage treatment, chemical industry;
3. Cosmetics, sunscreen cream, natural white moisture protection cream, beauty and whitening cream, morning and night cream, moistening refresher, vanishing cream, skin protecting cream, face washing milk, skim milk, powder make-up;
4. Coating, printing ink, plastics, foods packing material;
5. Coating for paper-making industry: used for improving the impressionability and opacity of the paper and used for producing titanium, ferrotitanium alloy, carbide alloy etc in the metallurgical industry; 6. Astronautics industry.

Recommended Dosage:
There is a wide range of product application in different fields with a large different amount of dosage, from 0.5 to 8%. In general, the quantity to be added is about 1-3% for sunscreen agent, 3-5% for whitening and moisture preservation, 3-8% for ultraviolet ray resistance and 2.5% for printing ink and coating. The end user shall determine the quantity to be added through testing and make the best dosage choice for the best use.

error: